AAMI PB70 Level 2
|
||
Style Features... |
DL171 |
|
| Fabric | Front | Back |
|---|---|---|
| DenLine® Fluid & Stain Resistant Fabric. 99% Polyester/1% Carbon |
Yes | NEW UltraLite™ |
| Fluid Resistance – Protects against Incidental Splash of Blood, OPIM, Aerosols, and ALL Aqueous Liquids | ||
| Areas of Body Protected – 360° Front & Back | Yes | Yes |
| Bio Safety Level Protection | BSL-1 & BSL-2 | BSL-1 & BSL-2 |
| AATCC Test Results @ 200 Commercial Washes | ||
| Hydrostatic Pressure (AATCC 127) | >325.0 mm | >275.0 mm |
| Impact Penetration (AATCC 42) | <1.0 (g) | <4.5 (g) |
| Comfort – Air Permeability, Measured in Cubic Feet /Min.(CFM) Air Flow | ||
| Front and Back Fabrics | 12.0 CFM | 35.0 CFM |
| Overall Coat Average |  18.0 CFM |
|
| Comparable to This % Poly/Cotton | 70/30 | |
| Appearance |
|---|
| Stain Resistant - Repels all Aqueous Liquids (Blood, Bleach, Reagents) |
| NEW Black Color - Masks Ink and Marker Stains |
| Wrinkle Resistant Fabrics |
| Static Control |
|---|
| Surface Resistivity - Front and Sleeve Fabric 109: Back Fabric 107 (Test Method 76) |
| Static Decay (FTMS 4046-101 C) < 1.0 sec. |
| Lint Free |
|---|
| Tested Clean Room ISO 5 (Class 100) – Suitable for Use in Clean Rooms |
| Construction |
|---|
| Pockets: “No Failure” Stitching. Double Stitched, Bar Tack Reinforced Top Corners. |
| 90° Corners at Pocket Bottom – Prevents “Punch Out” of Corner Stitching During Life of Coat. |
| Snap Closures: “Lifetime Guaranteed, “ Heavy Duty, Stainless Steel. |
| Cuffs: Durable, Spun Woven, “Low Pill” Polyester, Comfortable, “Quick Dry” if Wet, Stain Resistant Finish. |
| Side Vents at Hip: Provide access to Pant Pockets; Prevent "Ride-Up" of Fabric when Sitting. |
| Autoclavable Fabric |
|---|
| Autoclavable in Pouch (274°F for 5 Minutes) Sanitizes Coat |
| Durability |
|---|
| Tested 200+ Commercial Wash and Dry Cycles |
| 7.7 Year Coat Life at 26 washes/year |
| Wash Protocol - Same For All DenLine Styles |
|---|
| Meets CDC/HICPAC Recommendations for Sanitizing Bloodborne Linen |
| Water Temperature: Hot Water (160°F) or Warm Water with Sanitizers (Peroxide or Bleach) |
| Finish: Steam Tunnel (260°F to 295°F): or Gas Dryer - Perm Press Cycle (165°F Maximum) |
